Automobile inspection fixture accessories As a special inspection fixture, it needs to be operated by a special person. Under the specified environment such as temperature and humidity that meet the requirements, the inspection site should be operated in accordance with the steps specified in the inspection tool manual. The inspection tool needs regular maintenance, such as the lubrication of the main positioning holes and pins, the rust prevention of the inner and outer functional surfaces, and the dust removal of the mold bottom plate. Similar measuring instruments and inspection tools also require regular verification and appraisal by the metrology department, so what is the design, manufacture and use of automobile inspection tool accessories?

It is necessary to avoid the idea of re-emphasizing parts but not gages, and correct the idea of emphasizing the manufacture of gages and not the use of gages. If financial and material resources have been spent to equip the inspection fixtures, but they are locked in the boudoir or a dusty corner, no one uses them or uses them improperly, or someone can operate them correctly but cannot be used in daily production, then the measurement of the automobile inspection fixture accessories and The due role in the evaluation cannot be played correctly, which violates the original intention of developing the inspection tool. In short, it is necessary to equip the inspection fixtures, match the qualified inspection fixtures, and use them correctly. In the production of parts, inspection tools should be used regularly to inspect and evaluate parts, and relevant records should be made every time to strictly and meticulously control product quality.

Precautions before using tools for automobile inspection fixture accessories:

1. Check whether the certificate label of the inspection tool is within the validity period of the inspection.

2. Check whether the working outline of the fixture is damaged.

3. Whether the positioning device is invalid, whether the guide part is worn or incomplete.

4. Whether the clamping device is in good condition.

5. Whether the clamping device is loose.

6. Check whether the bolts are complete.

7. Whether the logo is clear and complete.

8. The inspection tools must be kept clean, especially the measuring datum and moving parts must not have iron filings or other impurities.

It can be put into use after the self-inspection meets the requirements of use, otherwise it cannot be put into use. Precautions in the use of automobile inspection fixture accessories:

1. The part of the inspection tool that requires manual direct manipulation during use must be handled with care to avoid bumps.

2. The bottom plate cannot be used as a place to place parts, especially sheet metal inspection tools. In use, users often mistake the bottom plate for a desktop.

3. Knives, knives and other tools cannot be stacked on the fixture, so as not to damage the surface of the fixture.

4. As a measuring device, the inspection tool cannot replace other tools.

5. Check whether there is any abnormal phenomenon, such as uneven surface, burrs, bending deformation, etc. Do not repair it yourself and do not allow hammering, filing or sanding.

6. When measuring the workpiece, do not use excessive force or force it, otherwise it will cause damage to the fixture.

7. The parts of the gage must be complete, and irrelevant personnel are not allowed to disassemble the parts of the gage at will, and report any problems found in the gage in time.